File-Based Routing

Most of the TanStack Router documentation is written for file-based routing and is intended to help you understand in more detail how to configure file-based routing and the technical details behind how it works. While file-based routing is the preferred and recommended way to configure TanStack Router, you can also use code-based routing if you prefer.

File-based routing is a way to configure your routes using the filesystem. Instead of defining your route structure via code, you can define your routes using a series of files and directories that represent the route hierarchy of your application. This brings a number of benefits:

• Simplicity: File-based routing is visually intuitive and easy to understand for both new and experienced developers.
• Organization: Routes are organized in a way that mirrors the URL structure of your application.
• Scalability: As your application grows, file-based routing makes it easy to add new routes and maintain existing ones.
• Code-Splitting: File-based routing allows TanStack Router to automatically code-split your routes for better performance.
• Type-Safety: File-based routing raises the ceiling on type-safety by generating managing type linkages for your routes, which can otherwise be a tedious process via code-based routing.
• Consistency: File-based routing enforces a consistent structure for your routes, making it easier to maintain and update your application and move from one project to another.

While directories have long been used to represent route hierarchy, file-based routing introduces an additional concept of using the . character in the file-name to denote a route nesting. This allows you to avoid creating directories for few deeply nested routes and continue to use directories for wider route hierarchies. Let's take a look at some examples!

Directories can be used to denote route hierarchy, which can be useful for organizing multiple routes into logical groups and also cutting down on the filename length for large groups of deeply nested routes:

Flat routing gives you the ability to use .s to denote route nesting levels. This can be useful when you have a large number of uniquely deeply nested routes and want to avoid creating directories for each one:

It's extremely likely that a 100% directory or flat route structure won't be the best fit for your project, which is why TanStack Router allows you to mix both flat and directory routes together to create a route tree that uses the best of both worlds where it makes sense:

Both flat and directory routes can be mixed together to create a route tree that uses the best of both worlds where it makes sense.

Dynamic path params can be used in both flat and directory routes to create routes that can match a dynamic segment of the URL path. Dynamic path params are denoted by the $ character in the filename:

We'll learn more about dynamic path params in the Path Params guide.

Pathless routes wrap child routes with either logic or a component without requiring a URL path. Non-path routes are denoted by the _ character in the filename:

To learn more about pathless routes, see the Routing Concepts - Pathless Routes guide.

File-based routing requires that you follow a few simple file naming conventions to ensure that your routes are generated correctly. The concepts these conventions enable are covered in detail in the Route Trees & Nesting guide.

💡 Remember: The file-naming conventions for your project could be affected by what options are configured in your tsr.config.json. By default, the routeFileIgnorePrefix option is set to -, as such files and directories starting with - will not be considered for routing.

• __root.tsx
  • The root route file must be named __root.tsx and must be placed in the root of the configured routesDirectory.
• . Separator
  • Routes can use the . character to denote a nested route. For example, blog.post will be generated as a child of blog.
• $ Token
  • Routes segments with the $ token are parameterized and will extract the value from the URL pathname as a route param.
• _ Prefix
  • Routes segments with the _ prefix are considered layout-routes and will not be used when matching its child routes against the URL pathname.
• _ Suffix
  • Routes segments with the _ suffix exclude the route from being nested under any parent routes.
• (folder) folder name pattern:
  • A folder that matches this pattern is treated as a route group which prevents this folder to be included in the route's URL path.
• index Token
  • Routes segments ending with the index token (but before any file types) will be used to match the parent route when the URL pathname matches the parent route exactly. This can be configured via the indexToken configuration option, see options.
• .route.tsx File Type
  • When using directories to organize your routes, the route suffix can be used to create a route file at the directory's path. For example, blog.post.route.tsx or blog/post/route.tsx can be used at the route file for the /blog/post route. This can be configured via the routeToken configuration option, see options.
• .lazy.tsx File Type
  • The lazy suffix can be used to code-split components for a route. For example, blog.post.lazy.tsx will be used as the component for the blog.post route.

To get started with file-based routing, you'll need to configure your project's bundler to use the TanStack Router Plugin or the TanStack Router CLI.

To enable file-based routing, you'll need to be using React with a supported bundler. TanStack Router currently has support for the following bundlers:

• Vite
• Rspack/Rsbuild
• Webpack
• Esbuild
• Others??? (let us know if you'd like to see support for a specific bundler)

When using TanStack Router's file-based routing through one of the supported bundlers, our plugin will automatically generate your route configuration through your bundler's dev and build processes. It is the easiest way to use TanStack Router's route generation features.

If your bundler is not yet supported, you can reach out to us on Discord or GitHub to let us know. Till then, fear not! You can still use the @tanstack/router-cli package to generate your route tree file.

To use file-based routing with Vite, you'll need to install the @tanstack/router-plugin package.

npm install -D @tanstack/router-plugin

npm install -D @tanstack/router-plugin

Once installed, you'll need to add the plugin to your Vite configuration.

// vite.config.ts
import { defineConfig } from 'vite'
import viteReact from '@vitejs/plugin-react'
import { TanStackRouterVite } from '@tanstack/router-plugin/vite'

// https://vitejs.dev/config/
export default defineConfig({
  plugins: [
    TanStackRouterVite(),
    viteReact(),
    // ...
  ],
})

// vite.config.ts
import { defineConfig } from 'vite'
import viteReact from '@vitejs/plugin-react'
import { TanStackRouterVite } from '@tanstack/router-plugin/vite'

// https://vitejs.dev/config/
export default defineConfig({
  plugins: [
    TanStackRouterVite(),
    viteReact(),
    // ...
  ],
})

Or, you can clone our Quickstart Vite example and get started.

Now that you've added the plugin to your Vite configuration, you're all set to start using file-based routing with TanStack Router.

You shouldn't forget to ignore the generated route tree file. Head over to the Ignoring the generated route tree file section to learn more.

To use file-based routing with Rspack or Rsbuild, you'll need to install the @tanstack/router-plugin package.

npm install -D @tanstack/router-plugin

npm install -D @tanstack/router-plugin

Once installed, you'll need to add the plugin to your configuration.

// rsbuild.config.ts
import { defineConfig } from '@rsbuild/core'
import { pluginReact } from '@rsbuild/plugin-react'
import { TanStackRouterRspack } from '@tanstack/router-plugin/rspack'

export default defineConfig({
  plugins: [pluginReact()],
  tools: {
    rspack: {
      plugins: [TanStackRouterRspack()],
    },
  },
})

// rsbuild.config.ts
import { defineConfig } from '@rsbuild/core'
import { pluginReact } from '@rsbuild/plugin-react'
import { TanStackRouterRspack } from '@tanstack/router-plugin/rspack'

export default defineConfig({
  plugins: [pluginReact()],
  tools: {
    rspack: {
      plugins: [TanStackRouterRspack()],
    },
  },
})

Or, you can clone our Quickstart Rspack/Rsbuild example and get started.

Now that you've added the plugin to your Rspack/Rsbuild configuration, you're all set to start using file-based routing with TanStack Router.

You shouldn't forget to ignore the generated route tree file. Head over to the Ignoring the generated route tree file section to learn more.

To use file-based routing with Webpack, you'll need to install the @tanstack/router-plugin package.

npm install -D @tanstack/router-plugin

npm install -D @tanstack/router-plugin

Once installed, you'll need to add the plugin to your configuration.

// webpack.config.ts
import { TanStackRouterWebpack } from '@tanstack/router-plugin/webpack'

export default {
  plugins: [TanStackRouterWebpack()],
}

// webpack.config.ts
import { TanStackRouterWebpack } from '@tanstack/router-plugin/webpack'

export default {
  plugins: [TanStackRouterWebpack()],
}

Or, you can clone our Quickstart Webpack example and get started.

Now that you've added the plugin to your Webpack configuration, you're all set to start using file-based routing with TanStack Router.

You shouldn't forget to ignore the generated route tree file. Head over to the Ignoring the generated route tree file section to learn more.

To use file-based routing with Esbuild, you'll need to install the @tanstack/router-plugin package.

npm install -D @tanstack/router-plugin

npm install -D @tanstack/router-plugin

Once installed, you'll need to add the plugin to your configuration.

// esbuild.config.js
import { TanStackRouterEsbuild } from '@tanstack/router-plugin/esbuild'

export default {
  // ...
  plugins: [TanStackRouterEsbuild()],
}

// esbuild.config.js
import { TanStackRouterEsbuild } from '@tanstack/router-plugin/esbuild'

export default {
  // ...
  plugins: [TanStackRouterEsbuild()],
}

Or, you can clone our Quickstart Esbuild example and get started.

Now that you've added the plugin to your Esbuild configuration, you're all set to start using file-based routing with TanStack Router.

You shouldn't forget to ignore the generated route tree file. Head over to the Ignoring the generated route tree file section to learn more.

To use file-based routing with the TanStack Router CLI, you'll need to install the @tanstack/router-cli package.

npm install -D @tanstack/router-cli

npm install -D @tanstack/router-cli

Once installed, you'll need to amend your your scripts in your package.json for the CLI to watch and generate files.

{
  "scripts": {
    "generate-routes": "tsr generate",
    "watch-routes": "tsr watch",
    "build": "npm run generate-routes && ...",
    "dev": "npm run watch-routes && ..."
  }
}

{
  "scripts": {
    "generate-routes": "tsr generate",
    "watch-routes": "tsr watch",
    "build": "npm run generate-routes && ...",
    "dev": "npm run watch-routes && ..."
  }
}

You shouldn't forget to ignore the generated route tree file. Head over to the Ignoring the generated route tree file section to learn more.

With the CLI installed, the following commands are made available via the tsr command

Generates the routes for a project based on the provided configuration.

tsr generate

tsr generate

Continuously watches the specified directories and regenerates routes as needed.

Usage:

tsr watch

tsr watch

With file-based routing enabled, whenever you start your application in development mode, TanStack Router will watch your configured routesDirectory and generate your route tree whenever a file is added, removed, or changed.

⚠️ Note: To disable the plugin when running tests via vitest, you can conditionally add it based on the current NODE_ENV:

// vite.config.ts
import { defineConfig } from 'vite'
import viteReact from '@vitejs/plugin-react'
import { TanStackRouterVite } from '@tanstack/router-vite-plugin'

// vitest automatically sets NODE_ENV to 'test' when running tests
const isTest = process.env.NODE_ENV === 'test'

// https://vitejs.dev/config/
export default defineConfig({
  plugins: [
    !isTest && TanStackRouterVite(),
    viteReact(),
    // ...
  ],
})

// vite.config.ts
import { defineConfig } from 'vite'
import viteReact from '@vitejs/plugin-react'
import { TanStackRouterVite } from '@tanstack/router-vite-plugin'

// vitest automatically sets NODE_ENV to 'test' when running tests
const isTest = process.env.NODE_ENV === 'test'

// https://vitejs.dev/config/
export default defineConfig({
  plugins: [
    !isTest && TanStackRouterVite(),
    viteReact(),
    // ...
  ],
})

If your project is configured to use a linter and/or formatter, you may want to ignore the generated route tree file. This file is managed by TanStack Router and therefore shouldn't be changed by your linter or formatter.

Here are some resources to help you ignore the generated route tree file:

• Prettier - https://prettier.io/docs/en/ignore.html#ignoring-files-prettierignore
• ESLint - https://eslint.org/docs/latest/use/configure/ignore#ignoring-files
• Biome - https://biomejs.dev/reference/configuration/#filesignore

If you are using VSCode, you can also add the following to your .vscode/settings.json file to exclude the generated route tree file from the editor's file watcher:

{
  "files.watcherExclude": {
    "**/routeTree.gen.ts": true
  }
}

{
  "files.watcherExclude": {
    "**/routeTree.gen.ts": true
  }
}

File-based routing comes with some sane defaults that should work for most projects:

{
  "routesDirectory": "./src/routes",
  "generatedRouteTree": "./src/routeTree.gen.ts",
  "routeFileIgnorePrefix": "-",
  "quoteStyle": "single"
}

{
  "routesDirectory": "./src/routes",
  "generatedRouteTree": "./src/routeTree.gen.ts",
  "routeFileIgnorePrefix": "-",
  "quoteStyle": "single"
}

If these defaults work for your project, you don't need to configure anything at all! However, if you need to customize the configuration, you can do so by creating a tsr.config.json file in the root of your project directory.

• Place the tsr.config.json file in the root of your project directory.

The following options are available for configuration via the tsr.config.json file:

• routeFilePrefix

  • (Optional) If set, only route files and directories that start with this string will be considered for routing.

• routeFileIgnorePrefix

  • (Optional, Defaults to -) Route files and directories that start with this string will be ignored. By default this is set to - to allow for the use of directories to house related files that do not contain any route files.

• routeFileIgnorePattern

  • (Optional) Ignore specific files and directories in the route directory. It can be used in regular expression format. For example, .((css|const).ts)|test-page will ignore files / directories with names containing .css.ts, .const.ts or test-page.

• indexToken

  • (Optional, Defaults to 'index') allows to customize the index Token file naming convention.

• routeToken

  • (Optional, Defaults to 'route') allows to customize the route Token file naming convention.

• routesDirectory

  • (Required) The directory containing the routes relative to the cwd.

• generatedRouteTree

  • (Required) The path to the file where the generated route tree will be saved, relative to the cwd.

• autoCodeSplitting

  • (Optional, Defaults to false)
  • If set to true, all non-critical route configuration items will be automatically code-split.
  • See the using automatic code-splitting guide.

• quoteStyle

  • (Optional, Defaults to single) whether to use single or double quotes when formatting the generated route tree file.`

• semicolons

  • (Optional, Defaults to false) whether to use semicolons in the generated route tree file.

• apiBase

  • (Optional) The base path for API routes. Defaults to /api.
  • This option is reserved for future use by the TanStack Start for API routes.

• disableTypes

  • (Optional, Defaults to false) whether to disable generating types for the route tree
  • If set to true, the generated route tree will not include any types.
  • If set to true and the generatedRouteTree file ends with .ts or .tsx, the generated route tree will be written as a .js file instead.

• addExtensions

  • (Optional, Defaults to false) add file extensions to the route names in the generated route tree

• disableLogging

  • (Optional, Defaults to false) disables logging for the route generation process

• routeTreeFileHeader

  • (Optional) An array of strings to prepend to the generated route tree file content.
  • Default:
  • [
      '/* eslint-disable */',
      '// @ts-nocheck',
      '// noinspection JSUnusedGlobalSymbols'
    ]
    

    [
      '/* eslint-disable */',
      '// @ts-nocheck',
      '// noinspection JSUnusedGlobalSymbols'
    ]
    

• routeTreeFileFooter

  • (Optional) An array of strings to append to the generated route tree file content.
  • Default: []

• disableManifestGeneration

  • (Optional, Defaults to false) disables generating the route tree manifest

Via the routeFilePrefix and routeFileIgnorePrefix options, the CLI can be configured to only include files and directories that start with a specific prefix, or to ignore files and directories that start with a specific prefix. This is especially useful when mixing non-route files with route files in the same directory, or when using a flat structure and wanting to exclude certain files from routing.

To only consider files and directories that start with ~ for routing, the following configuration can be used:

🧠 A prefix of ~ is generally recommended when using this option. Not only is this symbol typically associated with the home-folder navigation in unix-based systems, but it is also a valid character for use in filenames and urls that will typically force the file to the top of a directory for easier visual indication of routes.

{
  "routeFilePrefix": "~",
  "routesDirectory": "./src/routes",
  "generatedRouteTree": "./src/routeTree.gen.ts"
}

{
  "routeFilePrefix": "~",
  "routesDirectory": "./src/routes",
  "generatedRouteTree": "./src/routeTree.gen.ts"
}

With this configuration, the Posts.tsx, Post.tsx, and PostEditor.tsx files will be ignored during route generation.

~__root.tsx
~posts.tsx
~posts
  ~index.tsx
  ~$postId.tsx
  ~$postId
    ~edit.tsx
    PostEditor.tsx
  Post.tsx
Posts.tsx

~__root.tsx
~posts.tsx
~posts
  ~index.tsx
  ~$postId.tsx
  ~$postId
    ~edit.tsx
    PostEditor.tsx
  Post.tsx
Posts.tsx

It's also common to use directories to house related files that do not contain any route files:

~__root.tsx
~posts.tsx
~posts
  ~index.tsx
  ~$postId.tsx
  ~$postId
    ~edit.tsx
    components
      PostEditor.tsx
  components
    Post.tsx
components
  Posts.tsx
utils
  Posts.tsx

~__root.tsx
~posts.tsx
~posts
  ~index.tsx
  ~$postId.tsx
  ~$postId
    ~edit.tsx
    components
      PostEditor.tsx
  components
    Post.tsx
components
  Posts.tsx
utils
  Posts.tsx

To ignore files and directories that start with - for routing, the following configuration can be used:

🧠 A prefix of - is generally recommended when using this option since the minus symbol is typically associated with removal or exclusion.

{
  "routeFileIgnorePrefix": "-",
  "routesDirectory": "./src/routes",
  "generatedRouteTree": "./src/routeTree.gen.ts"
}

{
  "routeFileIgnorePrefix": "-",
  "routesDirectory": "./src/routes",
  "generatedRouteTree": "./src/routeTree.gen.ts"
}

With this configuration, the Posts.tsx, Post.tsx, and PostEditor.tsx files will be ignored during route generation.

__root.tsx
posts.tsx
posts
  index.tsx
  $postId.tsx
  $postId
    edit.tsx
    -PostEditor.tsx
  -Post.tsx
-Posts.tsx

__root.tsx
posts.tsx
posts
  index.tsx
  $postId.tsx
  $postId
    edit.tsx
    -PostEditor.tsx
  -Post.tsx
-Posts.tsx

It's also common to use ignored directories to house related files that do not contain any route files:

__root.tsx
posts.tsx
posts
  index.tsx
  $postId.tsx
  $postId
    edit.tsx
    -components
      PostEditor.tsx
  -components
    Post.tsx
-components
  Posts.tsx
-utils
  Posts.tsx

__root.tsx
posts.tsx
posts
  index.tsx
  $postId.tsx
  $postId
    edit.tsx
    -components
      PostEditor.tsx
  -components
    Post.tsx
-components
  Posts.tsx
-utils
  Posts.tsx